‧AC‧S125AP (MS)
120x120x25.5mm/4.7x1inch
68 CFM
Sinwan Plastic Impeller Tubeaxial Fan
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
S125AP-11-1** 115 100~120 50/60 15/13(~18) 2200/2400 55/68 1.6/1.9 0.22/0.27 5.59/6.86 38/40 2/1 £
S125AP-11-2** 115 100~120 50/60 12/10 2000/2200 47/56 1.3/1.6 0.19/0.21 4.83/5.33 30/32 4/3 £
S125AP-11-3** 115 100~120 50/60 8/6 1650/1500 41/40 1.2/1.1 0.16/0.15 4.06/3.81 25/24 6/5 £
S125AP-11-3** (33) 115 110~140 50/60 8/6 1400/1250 39/38 1.1/1.1 0.13/0.11 3.3/2.79 20/18 - £
S125AP-22-1** 230 200~240 50/60 15/13(~18) 2200/2400 55/68 1.6/1.9 0.22/0.27 5.59/6.86 38/40 2/1 £
S125AP-22-2** 230 200~240 50/60 12/10 2000/2200 47/56 1.3/1.6 0.19/0.21 4.83/5.33 30/32 4/3 £
S125AP-22-3** 230 200~240 50/60 8/6 1650/1500 41/40 1.2/1.1 0.16/0.15 4.06/3.81 25/24 6/5 £
S125AP-22-3** (33) 230 220~260 50/60 8/6 1450/1250 39/38 1.1/1.1 0.13/0.11 3.3/2.79 20/18 - £
S125AP-11/22-1** dual volt 115
230 		100~120
200~240 		50/60 15/13(~18) 2200/2400 55/68 1.6/1.9 0.22/0.27 5.59/6.86 37/38 2/1 £
S125AP-11/22-2** dual volt 115
230 		100~120
200~240 		50/60 12/10 2000/2200 47/56 1.3/1.6 0.19/0.21 4.83/5.33 29/31 4/3 £
S125AP-11/22-3** dual volt 115
230 		100~120
200~240 		50/60 8/6 1500/1250 36/32 1/0.9 0.13/0.10 3.3/2.54 21/20 6/5 £
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Shaded pole induction, inner rotor, 1-phase
      Burnout Protection: Impedance protected
      IP Protection: -
      Frame: Aluminum die cast, black(S125AP(MS))
      Impeller: 5 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings. or sleeve bearing
      Rotation: CCW seen on rotor
      Connection: Wire leads, terminal flat pin
      Weight: 380 g (0.83 Lbs)
      Dielectric Strength: Over 1 min.at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output:
      Operating Temp: Non-condensing ball bearing (-20C~+70C), sleeve (-10~+40C)
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: L10 Formula 80K hours/45C, 40K hours/65C

     

    Metal Fan Guard
    G109-15A, G109-15B, G109-17


    Plastic Fan Guard
    G119P2, G119P4, G120P, G120P2, G120P25F, G120P4


    Plastic Fan Filter
    GRM120-30, GRM120-45


    Metal Fan Screen
    MF120S-30N